Troubleshooting Bissell Carpet Cleaner – The Ultimate Guide

Bissell is a popular brand in the cleaning industry. However, like any other machine, a Bissell carpet cleaner also encounters problems that require troubleshooting. In this article, we will outline the common issues that arise with Bissell carpet cleaners and how to fix them.

Introduction to Troubleshooting Bissell Carpet Cleaner

An Ultimate Guide to Solving Bissell Carpet Cleaner’s Common Issues

If you own a Bissell carpet cleaner, it’s important to know how to troubleshoot common problems that may arise.

In this section, I will provide specific examples of common problems and their corresponding troubleshooting steps.

By following these steps, you can save time and money by avoiding costly repairs or replacements.

Remember, a well-maintained Bissell carpet cleaner will not only keep your carpets clean but also extend the life of your device.

Let’s get started!

Troubleshooting Bissell Carpet Cleaner Not Turning On

If your Bissell carpet cleaner isn’t turning on, the first thing to check is the power cord.

Make sure it’s plugged in securely and that the outlet is working.

If the power cord is fine, check the switch to make sure it’s in the on position.

If the switch is on and the machine still isn’t turning on, there may be an issue with the motor or wiring.

In this case, it’s best to contact Bissell customer support for assistance.

Quick Troubleshooting Tips

  • Ensure the machine is plugged in and turned on
  • Check that the water tank is securely attached
  • Verify that the water flow indicator is illuminated or flashing
  • Check the solution tank valve and line for obstructions
  • Contact Bissell customer service if the problem persists

Remember to always check the basics first before moving on to more complex troubleshooting steps.

It’s often the simple things that can cause the most problems.

Troubleshooting Bissell Carpet Cleaner Not Dispensing Water

If you’re having trouble with your Bissell carpet cleaner not dispensing water, don’t worry.

It’s a common issue that can be easily fixed with a few troubleshooting steps.

Check the Basics

First, make sure that your machine is plugged in and turned on.

Also, check that the water tank is securely attached.

If it’s not, the machine won’t draw water from it.

Check the Water Flow Indicator

Next, check the water flow indicator.

If it’s not illuminated or flashing, there may be an issue with the solution tank or line.

Remove the tank and check the valve at the bottom.

Also, ensure that the solution line isn’t kinked, twisted, or clogged.

Clean it out with a small brush or paper clip if it’s dirty or obstructed.

Check the Pump or Motor

If you’ve checked everything and your Bissell carpet cleaner still isn’t dispensing water, there may be a problem with the pump or motor.

Contact Bissell customer service for assistance.

They can diagnose the issue and recommend a solution.

Troubleshooting Bissell Carpet Cleaner Not Dispensing Soap

If you’re having trouble with your Bissell carpet cleaner, don’t panic.

Before taking it to a repair shop, there are a few things you can do to troubleshoot the issue.

One of the most common problems is the soap not dispensing properly.

Here are some steps you can take to fix it:

Check the Soap Tank

The first thing you should do is check the soap tank.

Make sure it’s full and that the cap is securely in place.

If the tank is empty, fill it up with Bissell cleaning solution.

If the cap is loose, tighten it and try again.

Inspect the Machine

If the soap tank is full but the soap still isn’t dispensing, inspect the machine.

A clogged nozzle is a common reason for this issue.

Use a straightened paper clip to remove any blockage.

If the nozzle is still clogged, detach it and soak it in hot water for 15 to 20 minutes.

Then, use a toothbrush to scrub away any remaining debris.


When cleaning the nozzle, be gentle to avoid damaging it.

If the nozzle is damaged, it will need to be replaced.

Check the Pump

A faulty pump can also cause the soap not to dispense.

Listen for unusual sounds or test the pump by running water through the machine.

If the water comes out but there is no soap, replace the pump.


Make sure to use genuine Bissell replacement parts to ensure the best performance and avoid further damage to your machine.

Troubleshooting Bissell Carpet Cleaner Not Spinning

Is your Bissell carpet cleaner not spinning?

No worries; it’s a common issue that you can fix quickly.

Before calling a technician, try these troubleshooting tips.

Check the Brush Roll

The brush roll is the primary reason for the cleaner’s malfunction.

Check for obstructions like hair or debris.

Thoroughly clean the brush roll and replace any damaged brush rolls.

Check the Belt

Check the belt that connects the brush roll to the motor.

A loose or broken belt can cause the brush roll to stop functioning.

Replace the belt by removing the cover plate and fitting a new belt on the brush roll and motor’s drive shaft.

Check the Motor’s Suction Power

If the motor doesn’t have enough suction, the brush roll may not spin correctly.

Check the suction power by removing the nozzle and looking for obstructions in the hoses or filters.


To fix your Bissell carpet cleaner’s spinning issue, check the brush roll, belt, and motor suction power for any issues.

These simple steps can resolve most spinning issues and save you the cost of calling a technician.

Remember to replace any damaged parts immediately.

Additional Tips

  • Regularly clean your carpet cleaner to prevent future issues
  • Use only Bissell-approved cleaning solutions to avoid damaging your machine
  • Refer to your user manual for specific troubleshooting tips and maintenance instructions
  • Consider purchasing a warranty or protection plan for your carpet cleaner
  • If the issue persists, contact Bissell customer support for further assistance

Maintenance Tips for Bissell Carpet Cleaner

If you’re experiencing issues with your Bissell carpet cleaner, don’t worry.

There are several common problems that can be easily fixed with a little troubleshooting.

Here are some tips to help you get your carpet cleaner back up and running.

Refer to the User Manual

The first step in properly maintaining your Bissell carpet cleaner is to refer to the user manual.

The manual provides specific instructions and troubleshooting tips that can help you identify and fix the problem.

It is important to follow the instructions carefully to prevent any unnecessary damage to your machine.

Check the Power Supply, Hoses, and Filters

The next step is to check the power supply, hoses, and filters for common issues.

Make sure that the power cord is plugged in and the outlet is working.

Check the hoses for any clogs or damage.

Clean or replace the filters if they are dirty or clogged.

Regularly cleaning and maintaining your machine can prevent future problems.

Benefits of a Well-Functioning Carpet Cleaner

A well-functioning carpet cleaner not only improves the appearance of your carpets but also promotes a healthy living environment for you and your family.

It removes dirt, dust, and allergens that can cause respiratory problems and other health issues.

Regular cleaning also extends the life of your carpets and saves you money in the long run.

Conclusion for Troubleshooting Bissell Carpet Cleaner

In conclusion, troubleshooting your Bissell carpet cleaner is easy and can be done in a few simple steps.

By following these maintenance tips, you can also ensure your Bissell carpet cleaner operates at its best and provides you with a superior cleaning experience.

It can also save you time and money on repairs.

If you’re still having trouble, don’t hesitate to contact Bissell customer service for assistance.